- Open Access
Detecting epistatic interactions contributing to human gene expression using the CEPH family data
© Li et al; licensee BioMed Central Ltd. 2007
- Published: 18 December 2007
It is believed that epistatic interactions among loci contribute to variations in quantitative traits. Several methods are available to detect epistasis using population-based data. However, methods to characterize epistasis for quantitative traits in family-based association analysis are not well developed, especially for studying thousands of gene expression traits. Here, we proposed a linear mixed-model approach to detect epistasis for quantitative traits using family data. The proposed method was implemented in a widely used software program SOLAR. We evaluated the power of the method by simulation studies and applied this method to the analysis of the Centre d'Etude du Polymorphisme Humain family gene expression data provided by Genetics Analysis Workshop 15 (GAW15).
- Epistatic Interaction
- Genetic Analysis Workshop
- Peak Marker
- Epistasis Effect
- Significant Epistatic Interaction
With the ability to measure simultaneously thousands of gene expression traits, understanding the causes of transcriptional variation has been of great interest. Genetic interactions, also called epistasis, have been shown to affect gene expression phenotypes. For example, Brem and Kruglyak  found that the genetic basis of transcripts in yeast is more often likely to be polygenic rather than monogenic and that in yeast epistasis effects are present in more than 15% of transcripts. Therefore, it is essential to analyze epistatic interactions between loci that contribute to variations in gene expression traits.
Several statistical methods for studying epistatic interactions between loci for quantitative traits using populations of unrelated individuals or from experimental designs have been developed [2–6]. For quantitative traits using family-based samples (related individuals), epistatic testing has been incorporated into the variance-component linkage analysis and implemented in the software SOLAR . However, epistatic detection on the basis of the linkage analysis can only locate the two interacting loci in wide confidence intervals and will have small power for data sets with small sample sizes, such as in the GAW15 (Genetic Analysis Workshop 15) CEPH (Centre d'Etude du Polymorphisme Humain) data set, which only contains 194 individuals. In this situation, association-based methods are expected to have higher power for detecting epistasis. A variety of approaches [8, 9] that focus on association testing can be used to detect epistasis . However, these are transmission-disequilibrium test (TDT)-based methods, which also have lower power in epistasis studies. Also, it is complicated to identify the best statistical model for the joint effects of loci including their interactions through model selection, particularly for analyzing thousands of gene expression traits for thousands of markers.
In this paper, we have extended the association-based linear regression model [2, 3] by adding a random polygenic effect into the model to allow for familial data for epistasis detection of quantitative traits. The proposed linear mixed model was implemented in the widely used software program SOLAR , which calculates significance levels for each covariate, and performs covariate screening in the model. We applied the proposed method to a subset of the gene expression profiles in the CEPH data set as provided by GAW15.
Based on the linear regression model of Cokerham and Zeng  (also see Cordell ), we propose a linear mixed model for detecting epistatic interactions for quantitative traits using family-based data:
y = μ + a1x1 + d1z1 + a2x2 + d2z2 + i aa x1x2 + i ad x1z2 + i da z1x2 + i dd z1z2 + Wβ + v + ε.
This model assumes diallelic marker loci and that y is a normally distributed quantitative gene expression phenotype from related individuals, W is a vector of fixed covariates such as sex effects, β is the corresponding vector of coefficients, v is the random polygenic effect within a family, the vector of polygenic effects in each family follows multi-normal distribution N(0, 2A) where A is the kinship matrix and is the variance associated with vectors of polygenic effects, a i and d i are the additive and dominant effects, and x i and z i are dummy variables related to the genotypes at the locus i. For example, for a diallelic locus, we might set x i = 1 and z i = -0.5 for genotype BB, x i = 0 and z i = 0.5 for genotype Bb, and x i = -1 and z i = -0.5 for genotype bb, respectively. i aa , i ad , i da , and i dd are additive-additive, additive-dominant, and dominant-dominant interaction effects between the two loci, respectively, corresponding to epistatic interaction effects, and ε is the residual error, following normal distribution N(0, ). Significant interaction effects imply presence of epistasis.
To detect epistasis, for each gene expression phenotype, we ran Model (1) in SOLAR for each pair of single-nucleotide polymorphisms (SNPs) in the selected candidate regions (see Description of the data set for more details). The number of tests for each gene expression phenotype ranges from 6 to 820, depending on the marker density and size of the candidate regions selected for the epistasis search. For each gene expression phenotype, individual p-values were adjusted using false-discovery rate (FDR) under the general dependency assumption  within each phenotype. FDR-adjusted p-values equal to or less than 0.05 (FDR ≤ 0.05) are considered to be significant.
We simulated a data set based on the pedigree structure from CEPH family data, which has 14 three-generation families of 194 individuals. We considered two unlinked diallelic markers in our analysis with allele frequency of 0.5. Marker genotypes for the grandparents were generated assuming Hardy-Weinberg equilibrium at each locus. Genotypes for parents and children were simulated conditional on their parental genotypes following Mendel's law. As an example we evaluated the power (true negative rate) and type I error (false-positive rate) of the proposed method in identifying additive-additive epistatic effect i aa . Phenotypes of each individual was generated based on the Model (1), where a1 = 0.2, d1 = 0.01, a2 = 0.2, d2 = 0.01, i ad = i da = i dd = 0, β = 0.1 (the vector W only contains sex), . When evaluating power and type I error we set i aa = 0.7 and i aa = 0, respectively. These values were chosen based on the estimated values from analysis of selected 27 traits in the CEPH family data. We plotted receiver operating characteristic (ROC) curve by calculating specificity and sensitivity as we varied the nominal threshold for determining the significant epistasis, where:
1 - specificity = (false positive)/(true negative + false positive)
sensitivity = (true positive)/(true positive + false negative).
Description of the dataset
The CEPH family data provided by GAW15 includes 3554 Affymetrix® gene expressions measured for 194 individuals from 14 three-generation CEPH families. In addition, 2882 autosomal and X-linked SNPs were typed for these individuals.
The software package pedStat as distributed in Merlin version 1.0.1  was used to check for Mendelian inconsistence, genotyping proportions, and heterozygosity of SNPs. SNP markers with minor allele frequencies less than 1% (equivalent to heterozygousity < 1.98%), markers with greater than 30% missing genotypes, and markers with only two of the three possible genotypes were removed from analysis, which left 2436 SNPs for our analysis.
We limited our analysis to the 27 gene expression phenotypes with the strongest linkage evidence of cis effects (Table 1 from Cheung et al ). Their Table 1 listed one to two peak markers for each phenotype, where a peak marker is the SNP with the most significant finding in the genome-wide association analysis (GWA) for this phenotype. Fourteen of the 27 gene expression phenotypes exhibited cis regulation (with cis peak markers) by the GWA analysis. For the phenotype PPAT there are two peak markers that point to both cis and trans regulation for this gene. For the remaining 12 phenotypes, the peak markers are trans markers. In our study, for each of the 27 phenotypes we selected a 15-Mb candidate region centered on the target gene location. If a trans peak marker was identified in the GWA analysis, we also selected an additional 15-Mb candidate region centred on that marker. We analyzed the epistatic effects for all possible combinations of the SNPs within the candidate regions.
CEPH family data
FDR adjusted p-values of significant epistatic effects detected under the full mode with the model selection between two loci located on different chromosomes in the analysis of the CEPH family data
We have presented an association-based method for detecting epistatic interactions for quantitative traits using family data, and applied this method to the analysis of gene expression phenotypes of CEPH family data provided by GAW15. When we applied the proposed method to the CEPH data, we detected six SNP pairs that showed significant epistatic interactions for 3 gene expression phenotypes among the 27 phenotypes analyzed. We study the epistasis among genes by analyzing the interactions of SNPs located in the corresponding genes. This kind of epistasis detected from statistical tests does not necessarily correspond to the classic model of epistasis. Strong epistatic interactions among SNPs may not always indicate biological interactions among genes.
Although we demonstrated the association-based linear mixed-model approach for analyzing 27 phenotypes, the method is mainly proposed for analyzing thousands of phenotypes in genome-wide study. In general, one could identify two interacting linkage regions (QTL intervals) using two-dimensional genome linkage scan by allowing a higher a false-positive rate. Or one could do stepwise search of two interacting QTLs by identifying one primary QTL and then searching for the secondary QTL conditional on the primary locus being linked . Once the two candidate intervals (regions) have been identified, the proposed linear mixed-model approach in this work could be used for epistasis detection between SNPS.
The proposed linear mixed model could be implemented in two steps by first regressing out the fixed effects (not including genetic effects) and polygenic effects and then detecting genetic interaction effects using predicted residuals from the first-step analysis. This strategy is attractive because of its flexibility in identifying the best statistical model for the joint effects of loci and computational efficiency for analyzing thousands of gene expression traits in genome-wide study.
The authors thank Arcady Mushegian, and Dongxiao Zhu for helpful discussion and scientific editing. The authors acknowledge the financial support from Stowers Institute for Medical Research and as well as grants from the National Institutes of Health (R01ES09912 (GG), U54CA100949 (GPP, GG), R01NS043530 (GPP), and R01GM074913 (KZ)).
This article has been published as part of BMC Proceedings Volume 1 Supplement 1, 2007: Genetic Analysis Workshop 15: Gene Expression Analysis and Approaches to Detecting Multiple Functional Loci. The full contents of the supplement are available online at http://0-www.biomedcentral.com.brum.beds.ac.uk/1753-6561/1?issue=S1.
- Brem RB, Kruglyak L: The landscape of genetic complexity across 5700 gene expression traits in yeast. Proc Natl Acad Sci USA. 2005, 102: 1572-1577. 10.1073/pnas.0408709102.View ArticlePubMed CentralPubMedGoogle Scholar
- Cokerham CC, Zeng ZB: Design III with marker loci. Genetics. 1996, 143: 1437-1456.Google Scholar
- Cordell HJ: Epistasis. What it means, what it doesn't mean, and statistical methods to detect it in human. Hum Mol Genet. 2002, 11: 2463-2468. 10.1093/hmg/11.20.2463.View ArticlePubMedGoogle Scholar
- Nelson MR, Kardia SLR, Ferrell RE, Sing CF: A combinatorial partitioning method to identify multilocus genotypic partitions that predict quantitative trait variation. Genome Res. 2001, 11: 458-470. 10.1101/gr.172901.View ArticlePubMed CentralPubMedGoogle Scholar
- Culverhouse R, Klein T, Shannon W: Detecting epistatic interactions contributing to quantitative traits. Genet Epidemiol. 2004, 27: 141-152. 10.1002/gepi.20006.View ArticlePubMedGoogle Scholar
- Kao C, Zeng ZB, Teasdale RD: Multiple interval mapping for quantitative trait loci. Genetics. 1999, 152: 1203-1216.PubMed CentralPubMedGoogle Scholar
- Almasy L, Blangero J: Multipoint quantitative trait linkage analysis in general pedigrees. Am J Hum Genet. 1998, 62: 1198-1211. 10.1086/301844.View ArticlePubMed CentralPubMedGoogle Scholar
- Liu Y, Tritchler D, Bull SB: A unified framework for transmission-disequilibrium test analysis of discrete and continuous traits. Genet Epidemiol. 2002, 22: 26-40. 10.1002/gepi.1041.View ArticlePubMedGoogle Scholar
- Lunetta KL, Faraone SV, Biederman J, Laird NM: Family-based tests of association and linkage that use unaffected sibs covariates, and interactions. Am J Hum Genet. 2000, 66: 605-614. 10.1086/302782.View ArticlePubMed CentralPubMedGoogle Scholar
- Benjamini Y, Yekutieli D: The control of the false discovery rate in multiple testing under dependency. Ann Stat. 2001, 29: 1165-1188. 10.1214/aos/1013699998.View ArticleGoogle Scholar
- Abecasis GR, Cherny SS, Cookson WO, Cardon LR: Merlin-rapid analysis of dense genetic maps using sparse gene flow trees. Nat Genet. 2002, 30: 97-101. 10.1038/ng786.View ArticlePubMedGoogle Scholar
- Cheung VG, Spielman RS, Ewens KG, Weber TM, Morley M, Burdick JT: Mapping determinants of human gene expression by regional and whole genome association. Nature. 2005, 437: 1365-1369. 10.1038/nature04244.View ArticlePubMed CentralPubMedGoogle Scholar
- Storey JD, Akey JM, Kruglyak L: Multiple locus linkage analysis of genomewide expression in yeast. PLoS Biol. 2005, 3: 1380-1390. 10.1371/journal.pbio.0030267.View ArticleGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.